Infiniti JX35 Trailer Hitch Installation And Review Videos

Best 2013 Infiniti JX35 Hitch Options- Video

Today we're going to be taking a look at the best hitch options for your 2013 Infiniti JX35. There's two hitches we're going to be looking at today. The first one's going to be the CURT class three, part number C13126. The other one's going to be the Draw-Tite class three, part number 76031. The biggest difference that we're going to see between these two hitches is in the crosstube design. This CURT is going to allow it to be much more hidden because the crosstube's going to be tucked up behind the fascia, whereas with the Draw-Tite is going to be visible below that lower bumper. The next difference that I see most noticeable is going to be in the safety chain connection points. more

10/28/2016 8:56:09 AM

Trailer Hitch Installation - 2013 Infiniti JX35 - Draw-Tite- Video

Today on our 2013 Infinity JX35 we're going to be taking a look at and installing the Draw-Tite Max-Frame Trailer Hitch Receiver, part number 76031. With this hitch I like the clean look that it maintains, but it gives you very good usability and functionality. It gives a pretty nice, clean look and the face of the receiver tube opening here is nice and flush with the rearmost part of the bumper, so it doesn't protrude out but it does come out far enough that it's going to give you plenty of clearance for any of your hitch mounted accessories. Here it's got the 2 inch by 2 inch receiver tube opening with nice reinforcement collar welded to the outside here. It's got 2 pin holes, it's got the standard 5/8 inch hitch pin hole that's going to be used to secure all your accessories. Then the smaller 1/2 inch hole which is there for use with a J pin stabilization system. Got the steel plate that's welded on the underside in order to make the safety chain connection point. more

9/15/2016 4:56:24 PM

Trailer Hitch Installation - 2013 Infiniti JX35 - Curt- Video

Today on our 2013 Infiniti JX35 we're going to be taking a look at and also showing you how to install the Curt custom-fit class 3 trailer hitch receiver. This offers the 2 inch by 2 inch opening. Part number C13126. Now here's what our hitch is going to look like once we get it installed on our JX35. As you can see, we're going to have a completely hidden cross tube here. Really going to keep the back of the car looking nice but still giving us a very useful class 3 hitch. We've got our 2 inch by 2 inch receiver tube opening here. more

8/19/2016 1:14:59 PM